How to Select the Right Spectacle Blind (Figure-8 Blind) for Piping Systems

Spectacle blinds are designed to match the pressure class of the connecting flanges, typically Class 150, 300, 600, 900, 1500, or 2500. The rating determines the thickness and dimensions. Always confirm the design pressure and temperature of the system.

Size and Dimensions

The blind must match the nominal pipe size (NPS) and flange facing. Common facings include raised face (RF), flat face (FF), and ring-type joint (RTJ). Ensure the outside diameter, bolt circle, and bolt holes align with the mating flanges.

Standards Compliance

Spectacle blinds are typically manufactured in accordance with ASME B16.48. Other relevant standards include ASME B16.5 (flange dimensions) and ASME B16.47 (large diameter flanges). For international projects, check for compliance with EN 1092-1 or other local codes.

Standards to Confirm

Before ordering, verify that the spectacle blind meets the following:

• ASME B16.48: Standard for line blanks and spectacle blinds.
• Material specification: ASTM A105 for carbon steel, ASTM A182 for stainless steel, etc.
• Pressure-temperature ratings: Per ASME B16.5 for the applicable flange class.
• Testing standards: Hydrostatic or pneumatic testing as per ASME B31.1 or B31.3.
• Marking: Each blind must be stamped with material, pressure class, size, and heat number.

Inspection and Documentation

When receiving spectacle blinds, ensure the following documents are provided:

• Material test reports (MTRs) with chemical and mechanical properties.
• Dimensional inspection report verifying alignment of bolt holes and facing.
• Visual inspection for surface defects, burrs, or damage.
• Pressure test certificate if required.

For critical service, consider third-party inspections or additional NDT such as dye penetrant or radiographic testing.

RFQ Checklist

To get accurate quotes from suppliers like Hebei Haihao Group, include the following in your request for quotation:

• Nominal pipe size (NPS)
• Pressure class and flange facing
• Material grade and any special requirements (e.g., impact testing, hardness)
• Applicable standard (e.g., ASME B16.48)
• Quantity and delivery schedule
• Special testing or certification needs
• Destination and incoterms

Quality Risks to Avoid

• Mismatched dimensions: Verify bolt hole spacing and thickness to ensure tight shut-off.
• Incorrect material: Use MTRs to confirm material composition.
• Surface defects: Rust, pitting, or machining marks can cause leaks.
• Improper handling: Store and transport blinds carefully to prevent warping or damage.

Conclusion

Selecting the right spectacle blind requires careful consideration of material, pressure rating, dimensions, and standards. By confirming specifications, requesting proper documentation, and working with a reputable manufacturer, you can ensure safe and reliable isolation for your piping system.

For your next project, contact Hebei Haihao Group for high-quality spectacle blinds manufactured to ASME B16.48 and other international standards. Send your RFQ with the details listed above to receive a competitive quotation.