Procurement Guide for Welded Neck Flanges: Specifications, Standards, and RFQ Checklist

Always specify the standard and the facing type (raised face, flat face, ring joint) in your order. For critical services, also confirm that the flange meets the material specification of the attached pipe (e.g., ASTM A105 for carbon steel, ASTM A182 F316L for stainless steel).

Inspection Documents Required

To ensure traceability and compliance, request the following documents from the manufacturer:

1. Material Test Certificates (MTC) per EN 10204 3.1 or 3.2 – showing chemical composition and mechanical properties.
2. Heat treatment charts – if normalization or quenching and tempering is required.
3. Positive Material Identification (PMI) report – for alloys and stainless steel to verify grade.
4. Hydrostatic test certificate – confirming flange pressure rating.
5. Visual and dimensional inspection reports – including bore diameter, face flatness, and bolt hole alignment.
6. Third-party inspection certificate – if specified by the project (e.g., Lloyds, DNV, TÜV).

For high-integrity services (e.g., sour gas), consider additional requirements like Charpy V-notch impact testing and hardness testing.

RFQ Checklist: What to Include

A complete RFQ reduces lead time and avoids misunderstandings. Include at least the following:

• Quantity and size (NPS / DN and schedule of connecting pipe)
• Pressure class (e.g., Class 150, 300, 600, 900, 1500, 2500)
• Standard and edition (e.g., ASME B16.5-2020)
• Material grade (e.g., ASTM A105, A182 F304, A182 F316L)
• Facing type (RF, FF, RTJ) and finish (serrated, smooth)
• Hub dimensions (if non-standard)
• Packaging requirements (plywood cases, steel crates, rust-proof coating)
• Delivery terms (FOB, CIF, EXW)
• Certification requirements (full traceability, third-party inspection)

Attach a sketch or refer to a standard drawing if the flange has special bore dimensions or modified hub length.

Quality Risks to Watch For

Common issues with welded neck flanges include:

• Incorrect bore size: The bore must match the pipe inside diameter – a mismatch leads to welding problems and flow restriction.
• Wrong facing finish: A serrated finish is standard for raised-face flanges; a smooth finish may cause gasket leakage.
• Poor hub taper: The hub must provide gradual stress transition; sharp corners can lead to cracking under thermal cycling.
• Mixed material heats: Flanges from different melts may have slight variations in hardness, affecting galling resistance in bolting.
• Lack of heat treat documentation: For flanges above Class 600, post-weld heat treatment is often required.

Request a quality plan from the manufacturer listing hold points for inspection.

What to Send Before Quotation

To receive an accurate quotation from Hebei Haihao Group or any supplier, provide:

• A clear technical datasheet (as listed above)
• Applicable code or project specification (e.g., “ASTM A105, ASME B16.5 Class 300 raised face, serrated finish, NPS 4, Schedule 40”)
• Any special testing requirements (e.g., PMI 100%, hydrotest, UT)
• Quantity and target delivery date
• Delivery incoterm and destination port (if applicable)

A complete RFQ helps the manufacturer suggest cost-effective solutions – such as standard stock sizes versus custom fabrication – and reduces the chance of revision cycles.

Why Choose Hebei Haihao Group for Welded Neck Flanges

Hebei Haihao Group is an experienced manufacturer of forged flanges, pipe fittings, and piping packages. With advanced CNC machining, heat treatment facilities, and in-house testing capabilities, they produce welded neck flanges in carbon steel, stainless steel, and alloy steel. Their quality management system ensures compliance with international standards, and they can provide full certification packages including third-party inspection reports.

For your next procurement of welded neck flanges, submit a detailed RFQ to Hebei Haihao Group and receive a prompt, competitive quotation.

ASTM A105 / A182 / A350; carbon, alloy and stainless steel