Insights
Technical articles, standards comparisons, project case studies and buyer guides on pressure piping components, flanges and forged fittings.
Found us via Google? Get an ASTM/ASME pipe-fittings quote in 4 hours.
Send RFQ45 articles· Technical
TechnicalGrain size testing under ASTM A182 is mandatory only for certain grades. Learn when ASTM E112 applies, which methods are used, and what buyers must verify before accepting a fitting.
TechnicalCharpy impact records for pipe fittings often include subsize specimens. Learn what ASTM E23 and A370 actually require, and where acceptance criteria must be found.
TechnicalWeld repair acceptance for A234 and other wrought steel fittings is governed by the product specification, A960/A960M common requirements, and the purchase order — not by a generic visual pass/fail rule. Here's what to verify.
TechnicalASTM A960 sets common requirements for wrought steel pipe fittings covered by individual ASTM product specs like A234. This guide explains what buyers must verify when ordering and inspecting fittings.
TechnicalHow to verify heat identity, heat analysis vs product analysis, mechanical test evidence, and RFQ requirements when buying forged flanges to ASTM A961 and A105.
TechnicalASME publishes separate standards for metallic and nonmetallic gaskets. This checklist helps buyers cross-check gasket type, flange facing, and procurement details before issuing an RFQ.
TechnicalASME B16.21 defines nonmetallic flat gaskets for pipe flanges. This guide explains the standard's scope, why you must pair it with the mating flange standard, and what to verify during procurement to avoid misapplication.
TechnicalLearn how to select ASME B16.20 metallic gaskets for pipe flanges, verify compatibility with ASME B16.5 flanges, and avoid procurement pitfalls.
TechnicalCheck the ASME B16.9 stub end and ASME B16.5 lap joint flange as an assembly. Practical RFQ, inspection, and documentation points for EPC buyers.
